Call Now
1-866-200-9222

How Do I Convert DSL to Ethernet?

How Do I Convert DSL to Ethernet

Users commonly believe that DSL (Digital Subscriber Line or Digital Subscriber Loop) and Ethernet networks function similarly. That is, however, not true. In fact, Ethernet networks are used to connect the DSL connection to computers. Even though both technologies are quite distinct, they can work both in conjunction or independently. DSL internet routers provide weak internet connectivity and slow wifi compared to an Ethernet connection. To get better connection speeds, most users opt for Ethernet connections. The good news is that users can easily have their existing DSL networks converted to Ethernet ones as well.

If you are a subscriber of a fast bandwidth-based internet connection then you can reap benefits from both these technologies as they are highly compatible with speedy connections. Before we tell you how to convert your DSL connection to an Ethernet one, let’s briefly discuss about each of them below.

DSL

How a connection on DSL works is fairly simple. A network technology essentially, DSL (Digital Subscriber Line or Digital Subscriber Loop) connects users to the internet by transmitting data over telephone lines. These lines are also referred to as DSL wires or DSL cables. A gateway and a modem suffice for users to connect over a DSL network.  Using an interface card, you can connect your computer to the DSL network.

Ethernet

For home and offices alike, wired or ethernet connections constitute the standard solution. With that said, it is of note here that ethernet connections are slightly expensive compared to DSL connections. Since the connection is wired, data transfer is more fluent and data losses are fewer. To set up an Ethernet-based connection at home or in the office, standard authorities recommend the use of RJ cables. Computers connect internally with one another in such a setup.

The Equipment You Need 

It is very important to have good equipment so that the data transfer within the network is fluent. A good modem, robust wires, and a standardized router will enable you to work without experiencing lags, slowness, or high latency issues.

Copper is used as a standard material for manufacturing cables for both DSL and Ethernet networks. The only difference is that Ethernet has twisted wire pairs. With that said, the twisted wire pairs can vary for different types of Ethernet wires.

Make sure to select quality copper wires for these types of networks. Wires of poor quality will affect your network speeds. Besides this, make sure to be well aware of plugging devices and ports necessary for the conversion. Ethernet cables require larger plugs.

On the other hand, DSL networks use the usual telephone plug. Their plugging is not interchangeable, keep that in mind. And finally, make sure to use standardized cables. CAT5 or CAT6 are commonly used for Ethernet connections. However, you can still opt for the RJ11 cable of your DSL network.

Ethernet connections are generally good and you won’t normally run into a problem. Most of the time, to fix Ethernet issues, all you have to do is unplug the wire and then plug it back in. Keep your equipment in check and you can access fast browsing speeds easily.

Methods of Converting DSL to Ethernet

It is fairly easy to covert a DSL network to an Ethernet one. One can conveniently convert their existing DSL network by following the easy-to-understand ways below. With that said, make sure to use quality equipment so that you don’t have to change it frequently.

1. Use Adapters to Connect 

You can convert to an Ethernet-based network by using adaptors. It is recommended to have two adaptors that follow the Ethernet wiring scheme.

  • Make sure that you connect one end of the wire to your dedicated router.
  • Now connect the other end to the telephone line.
  • Note that in this setting, one end of the wire will act as an Ethernet cable enabling internet on your devices.

2. Connect to the WAN Port on the DSL Modem

A relatively simple way to convert your DSL modem into an Ethernet connection is by utilizing its Ethernet output. By default, your modem allows Ethernet connectivity with one device.

  • Start that by using the WAN port on the device.
  • Using this port, you can connect your PC or another device that the cable can connect with.
  • However, there are limitations in this way. You can only connect one device in this setup.

If you follow the above steps and take the necessary cautions, you can easily convert your existing DSL network into an Ethernet one.

Disclaimer: To our knowledge, we have made all the required efforts towards obtaining owner/publisher approval for the use of images in VISIONECLICK.COM blog posts. However, if you find violations of any sorts regarding any image, please feel free to contact us. Prices and packages mentioned may vary with time and the specific locations.